Yamaha VZ200 Owner's Manual page 78

Trouble Recovery
1. Water separator warning indicator
1. Stop the engine.
2. Remove the top cowling.
3. Disconnect the water detection switch
coupler.
ECM01570
CAUTION:
Be careful not to get any water on the wa-
ter detection switch coupler, otherwise a
malfunction could occur.
1
1. Water detection switch coupler
4. Unscrew the filter cup from the filter
housing.
NOTE:
Be careful not to twist the water detection
switch lead when unscrewing the filter cup.
72
1
2
1. Filter cup
2. Water detection switch lead
5. Drain the water in the filter cup by soak-
ing it up with a rag.
NOTE:
Properly dispose of the rag.
6. Firmly screw the filter cup onto the filter
housing.
NOTE:
Be careful not to twist the water detection
switch lead when screwing the filter cup onto
the filter housing.
7. Connect the water detection switch cou-
pler securely until a click is heard.
ZMU05502
1. Water detection switch coupler
8. Install the top cowling.
9. Start the engine and make sure that the
water separator warning indicator re-
1
ZMU05501
ZMU05500