Yamaha VZ200 Owner's Manual page 41

lows:
1. Start the engine. Leave it idling.
EWM00090
WARNING
Do not touch or remove electrical parts
G
when starting or during operation.
Keep hands, hair, and clothes away
G
from the flywheel and other rotating
parts while the engine is running.
2. Watch for oil flowing through the oil feed
pipes. After any air in the oil lines has
been expelled, the oil injection system
should supply oil normally. If no oil is
flowing after 10 minutes of idling, consult
your Yamaha dealer.
ECM00560
CAUTION:
Be sure to take the above steps when
G
operating the engine after a long period
of storage. Otherwise engine seizure
could occur.
Use straight gasoline only. If premix
G
fuel is used, the fuel injector could be
damaged.
Operation
ZMU01875
ZMU01876
35