Main Switch; Power Trim And Tilt Switch On Remote Control Or Tiller Handle - Yamaha F250 Owner's Manual

Basic components
1. Lanyard
2. Lock plate
1. Lanyard
2. Lock plate
EMU26090

Main switch

The main switch controls the ignition system;
its operation is described below.
" " (off)
G
With the main switch in the "
tion, the electrical circuits are off, and the key
can be removed.
" " (on)
G
With the main switch in the "
the electrical circuits are on, and the key can-
not be removed.
" " (start)
G
With the main switch in the "
sition, the starter motor turns to start the en-
gine. When the key is released, it returns
automatically to the "
16
2
1
ZMU04565
ON ON
OFF START OFF START
2
1
ZMU04564
" (off) posi-
" (on) position,
" (start) po-
" (on) position.
OFF
ON
OFF START
EMU26141
Power trim and tilt switch on remote
control or tiller handle
The power trim and tilt system adjusts the out-
board motor angle in relation to the transom.
Pressing the switch "
board motor up, then tilts it up. Pressing the
switch " " (down) tilts the outboard motor
down and trims it down. When the switch is re-
leased, the outboard motor will stop in its cur-
rent position.
NOTE:
For instructions on using the power trim and
tilt switch, see pages 41 and 43.
ON
START
ZMU04567
ON
OFF START
ZMU04566
" (up) trims the out-