Scientific Atlanta Explorer 8000HD Start Quide page 6

4. Choose one of the following options:
• If you have a standard-screen (4:3)
HDTV, press
• If you have a wide-screen (16:9) HDTV,
press
B
5. Choose one of the following options:
• To choose the Quick Setup option
press
A
television.
• To choose the Standard Setup option press
screen instructions. When you finish, press
press
• To choose the Custom Setup option, press
instructions. When you finish, press
to begin watching television.
Setting Up Your Explorer 8000HD DVR With an SDTV
If you have a standard-definition TV (SDTV), use the composite outputs to
connect the DVR to your TV. Refer to the Explorer 8000 Home Entertainment
Server User's Installation Guide (part number 4002771) for connection
information.
Follow these steps to start the Setup Wizard.
1. Make sure that the Explorer DVR is Off and the TV is On.
2. On the Explorer DVR, press Guide and Info at the same time. The TV
Connection Set-up screen appears, and the front panel LED displays either
HD-1 or SD-1. This LED changes between HD-1 and SD-1 every few
seconds.
3. When the front panel LED displays SD-1, press
watching television.
6
.
A
.
. Press to begin watching
to begin watching television.
; then follow the on-
B
to exit the setup. Then
; then follow the on-screen
to exit the setup. Then press
. Press to begin