Precautions..................A2 Workplace Preparation ..............A2 Working Practices .................A2 Monitor Driver Installation............A4 Driver installation for Windows 95 or Windows 98 ......A4 Driver installation for Windows 2000 or Windows Me ....A5 Driver installation for Windows XP ..........A6 Control Panel Function..............A7 Front Panel Controls..............A7 On Screen Display (OSD) Control Adjustment......A8 On Screen Display (OSD) Selection and Adjustment....A9 Troubleshooting..............A13...
Workplace Preparation Positioning the Monitor Choose a suitable place to position the monitor where it is not near fluorescent desk lighting or any equipment that produces magnetic fields that could cause interference. Ensure that the furniture or equipment can support the weight of the monitor. Allow at least 50mm (2 in.) ventilation space around the monitor.
Screen settings Set the screen brightness and contrast to a comfortable level. You may have to adjust this as the lighting changes during the day. Many application programs let you select color combinations which can help you to view in comfort. Power Cord For safe operation, use the power cord supplied with the unit.
Click OK. Ensure that the CD drive letter is selected. Choose IBM E50 monitor and Click OK. The files will be copied from the CD to your hard disk drive. Close all open windows and remove the CD. Restart the system.
Click OK. Ensure that the CD drive letter is selected. Choose IBM E50 monitor and Click OK. The files will be copied from the CD to your hard disk drive. Close all open windows and remove the CD. Restart the system.
Click OK. Ensure that the CD drive letter is selected. Choose IBM E50 monitor and Click OK. The files will be copied from the CD to your hard disk drive. Close all open windows and remove the CD. Restart the system.
Screen Adjustment Allow the monitor to stabilize for at least 30 minutes before making image adjustments. To make adjustments in the On Screen Display, follow these steps: Press the MENU Button, then the main menu of the OSD appears. To access a control, use the Buttons.
Page 12
The following table indicates all the On Screen Display control, adjustment, and setting menus. : Adjustable...
Page 13
You were introduced to the procedure of selecting and adjusting an item using the OSD system. Listed below are the icons, icon names, and icon descriptions of the all items shown on the Menu. CONTRAST BRIGHTNESS H POSITION H SIZE V POSITION V SIZE PINCUSHION...
Page 14
BOTTOM CORNER H MOIRE V MOIRE 9300 6500 COLOR CANCEL Position, Size, Side Pincushion, Side Pincushion RECALL Balance, Parallelogram, Trapezoid, Top Corner, Bottom Corner (These recalled options may differ depending on the mode selected: Preset, User, or New).
Page 15
CANCEL Brightness, Contrast, Color 9300, Video Level, OSD Time, Moire (These reset options may differ depending on the RESET mode selected: Preset, User, or New). LANGUAGE • 5 • 10 • 20 OSD TIME • 30 • 60 0.7V 1.0V VIDEO LEVEL DEGAUSS PRESET MODE...
Page 16
No image appears The screen is flickering.
Page 17
The screen color is not normal. I see an after-image on the screen. I see waves on the screen. Have you installed the monitor driver?
Preset Modes (Resolution) Display Modes (Resolution) Horizontal Freq. (kHz) Vertical Freq. (Hz) Service Information The following parts are for use by IBM services, or IBM authorized dealers, to support customer warranty. Parts are for service use only. 73P2089 E50 FRU MONITOR 6518...