Download Print this page

Specifications - Wharfedale Pro Denton User Manual

80th anniversary limited edition

Advertisement

Bi-Wiring
To bi-wire, you will need to install two
pairs of twin core cable between the
amplifier and each loudspeaker and
remove the terminal links.
Note: Some amplifiers have two pairs
of output terminals to facilitate bi-
wiring but this is not essential. The
advantages of bi-wiring are fully retained
if your amplifier has only one pair of
loudspeaker terminals per channel (as in
the illustration).
Looking After Your Loudspeaker
Your Wharfedale loudspeakers use a specially hardwearing sealed finish. They should not be waxed or treated with spray polishes
which will smear and dim their lustrous finish. Occasionally polish them with a dry or barely moist cloth to remove dust and finger
marks, etc.
Occasionally, remove the loudspeaker grilles and brush them gently with a soft brush before replacing them carefully.
Never stand objects on your loudspeakers. In particular do not stand flowers, etc. on them – they are not jardinieres!
Avoid getting any liquid behind the grille. If you accidentally spill liquid on your loudspeakers, take them to your dealer for attention
before using them again.
Do not open the speakers; there are no user serviceable parts inside. Never touch the driver units either with an object or your
hands.

Specifications

Description/Format
Drive Units
Frequency Response (±3dB )
Sensitivity (1W@1M)
A/V Shielded
Crossover Frequency
Nominal Impedance
Recommended Amplifier Power (RMS)
Dimensions (H × W × D)
Net Weight
Accessories
Service Address
For technical support, servicing or product queries and information please contact your local retailer or the office below.
UK
IAG Service Dept. Unit 4 St Margaret's Way, Stukeley Meadows Industrial Estate, Huntingdon, Cambs, PE29 6EB, England
Tel: +44 (0)1480 452561 Fax: +44 (0)1480 413403
2-way vented-box/standmount
1 x 25mm high frequency textile dome
1 x 125mm Woven Kevlar bass cone
44Hz - 24kHz
86dB
No
2.3kHz
6Ω
20 - 100W
320 × 200 × 305 (mm)
7.9kg / pcs
Rubber feet
IAG House, Sovereign Court, Ermine Business Park, Huntingdon, Cambs, PE29 6XU, UK
Tel: +44(0)1480 447700 Fax: +44(0)1480 431767 http://www.wharfedale.co.uk
IAG reserves the right to alter design and specifications without notice. All rights reserved © IAG Group Ltd.
Wharfedale is a member of the International Audio Group. Code: WH12-MNL001a
W H A R F E D A L E

Advertisement

loading