Westinghouse LD-3240 User Manual page 15

3.4 Menu Settings
You can adjust the Menu Settings here.
Press to select, press
to exit.
3.5 VGA Settings: When PC Mode is available.
Press button to select VGA Settings, Press
button, the screen will display as follow:
1).H-Pos: Adjust the horizontal position of the screen.
2).V-Pos: Adjust the vertical position of the screen.
3).Clock: Fine tune the screen width.
4).Phase: Fine tune the phase of the screen. Usually
don't adjust this item.
5).Auto: Auto adjust to fit the screen.
4. Channel MENU
The fourth item of the MENU is Channel MENU.
You can adjust digital and analog TV Channels.
Press to select, press
1). Air/Cable: select Air TV signal and cable TV signal.
to adjust, press MENU
2). Auto Scan: If it's the first time you use the TV, you
3). Favorite: Press
4). Show/Hide: Press
5). Channel NO. :Display the current channel number.
6). Channel label: Press
to adjust.
7). DTV signal: Display DTV strength signal. It can't be
-14-
should scan all the TV channels first,
press the button to confirm, you will see the
menu:
" "
select yes item and press the ENTER button to
confirm, You will see the message below which
indicates auto search is in process.
button to choose/delete the
favorite channel .
button to display or hide
current channel.
button to edit current channel
name.
selected and adjusted.
OPERATION