Troubleshooting - Westinghouse UW32SC1W User Manual

TROUBLESHOOTING

Problem
No power
Power is suddenly
turned off.
Remote control
does not work.
Remote control
code cannot be
detected by a
universal remote.
No picture
Corrective Action
• Make sure the power indicator is illuminated
blue.
• Make sure the power cord is securely
connected to the AC-in jack and is plugged
into a functional AC outlet. You may want to
plug in another electrical device to the power
outlet to verify that it is supplying the proper
voltage.
Make sure the sleep timer is turned off.
• Press only one button at a time.
• Make sure the batteries are properly inserted.
• The batteries may already be drained out.
Replace batteries with new ones.
• Purchase a separate learning remote control.
• Go to www.wde.com for a list of remote
codes.
• Make sure the video input cable is properly
connected to the correct terminal, and that the
correct input mode is enabled. To illustrate,
when a VGA cable is connected to display a
computer screen, the VGA input mode must
be enabled.
• Verify that the antenna is properly connected
and that the preferred channel is enabled in
the channel list. Press and select
Channels/Channel List.
• Adjust the display settings.