Running Initial Setup
..........................................................................................................................
_iiiiii ......................................................
iiii_
During
initial setup, you will perform
the following:
• Set the language for the On Screen Display (OSD) text
• Choose your viewing environment
• Scan for digital and analog channels
• Set the current date and time after Auto Program.
Complete your cable connections
before beginning the Initial Setup. Refer to the Quick
Setup Guide (supplied)
for sample connection diagrams.
1
Turn on theTV.
The Initial Setup screen will appear.
2
Use the remote control buttons described below to navigate through the Initial
Setup.
*/_/_./._ buttons:
Allow you to navigate and highlight options where applicable.
button:
Allows you to select the highlighted option and advance to the next screen.
3
Auto Program will scan for available channels from the signal source directly
connected to the TV's CABLE/ANTENNA input. Follow the help text provided on the
screen to run the Auto Program.
4
Set the current date and time.
20