Toshiba DVR D-R17DTKB Owner's Manual page 22

E7J70BD_EN.book Page 22 Monday, May 7, 2007 3:31 PM
Digital Audio for Better Sound Quality
Dolby Digital decoder,
DTS decoder or
MPEG decoder, etc.
COAXIAL
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
COAXIAL
IN
DIGITAL AUDIO OUTPUT
PCM/BITSTREAM
Y
L
P B /C B
R
OUT
P R /C R
AV2 (DECODER)
DVB-T ANALOG
COMPONENT ANALOG
ANTENNA VIDEO OUTPUT AUDIO OUT
The connections illustrated above are
optional for better sound.
1
For clear digital sound quality, use
the DIGITAL AUDIO OUTPUT
(COAXIAL) jack to connect your
digital audio equipment.
If the audio format of the digital output does not
match the capabilities of your receiver, the
receiver will produce a strong, distorted sound or
no sound at all.
Connecting a Dolby Digital™ decoder, DTS
decoder or MPEG decoder
• Connecting multi-channel Dolby Digital decoder
allows you to enjoy the Multi-channel Dolby Digital
surround system as well as DTS decoder, Multi-
channel surround system.
• After connecting to a Dolby Digital decoder, set
"Dolby Digital" to "Stream" in the Audio out menu.
(See page 72.)
• After connecting to a DTS decoder, set "DTS" to
"ON" in the Audio out menu. (See page 72.)
• After connecting to a MPEG decoder, set "MPEG" to
"Stream" in the Audio out menu. (See page 72.)
Connecting to an MD deck or DAT deck
• The audio source recorded in Dolby Digital Multi-
channel surround format cannot be recorded using
an MD or DAT deck as a digital sound.
• If not connected to a Dolby Digital decoder, set
"Dolby Digital" to "PCM" in the Audio out menu.
Playing back a DVD using incorrect settings may
generate noise distortion and damage speakers.
• Set "Dolby Digital" and "MPEG" to "PCM" and set
"DTS" to "OFF" in the Audio out menu for connecting
to an MD or DAT deck.
• You can use ANALOG AUDIO OUT jacks for the
connection of your audio system.
22
EN
Digital audio
input jacks
COAXIAL
Coaxial cable
(not supplied)
HDMI OUT
AV1 (TV)
After You Have Completed
Connections
Switch the input selector on your TV to an appropriate
external input channel. For details, refer to the
Owner's Manual of your TV.
Note
• Connect this unit directly to the TV. If the AV cables
are connected to a VCR, pictures may be distorted
due to the effects of the copy protection system.