Cisco 3600 Series Installation Manual page 22

Installing memory in the router

Hide thumbs Also See for 3600 Series:

Table of Contents

Replacing Flash Memory SIMMs

Figure 5-16 Flash Memory SIMM Locations on the Cisco 3660 Mainboard

Flash memory SIMMs

Removing Flash Memory SIMMs

Perform this procedure to remove a Flash memory SIMM from a mainboard:

Step 1

Attach an ESD-preventive wrist strap and ensure that it makes good contact with your skin. Connect the

equipment end of the wrist strap to the metal back plate of the chassis, avoiding contact with the

connectors.

Locate the Flash memory SIMM sockets on the mainboard. (See

Step 2

Handle SIMMs by the non-connector edges only. SIMMs are ESD-sensitive components and can be

Caution

damaged by mishandling.

Step 3

To lift the Flash memory SIMM out of its socket, pull the locking spring clips on both sides outward and

tilt the SIMM toward the left side of the chassis, free of the clips. (See

Cisco 3600 Series Hardware Installation Guide

5-22

Chapter 5

Installing Memory in the Router

Figure 5-14

through

Figure

5-17.)

5-16.)

OL-2056-02

Table of Contents

Show Quick Links

Table of Contents

3620 3640