Cisco uBR10012 Software Configuration Manual page 93

Universal broadband router
Hide thumbs Also See for uBR10012:
Table of Contents

Advertisement

Chapter 1
Overview of Cisco uBR10012 Universal Broadband Router Software
Refer to the
Note
additional information and MIBs constraints.
CISCO-ENHANCED-MEMPOOL-MIB
Cisco IOS Release 12.3(9) introduces support for the CISCO-CABLE-SPECTRUM-MIB on the Cisco
uBR10012 universal broadband router. The CISCO-ENHANCED-MEMPOOL-MIB enables you to
monitor CPU and memory utilization for "intelligent" line cards and broadband processing engines on
the Cisco uBR10012 router. These include the Cisco MC16X and MC28X series line cards.
Refer to the
Note
additional information and MIBs constraints.
CISCO-PROCESS-MIB
Cisco IOS Release 12.3(9) introduces support for the CISCO-PROCESS-MIB on the Cisco uBR10012
universal broadband router with PRE2 modules.The CISCO-PROCESS-MIB enables you to monitor
CPU and memory utilization for RF cards, cable interface line cards and broadband processing engines
on the Cisco uBR10012 router.
Note
Refer to the
additional information and MIBs constraints.
DOCS-QOS-MIB
Cisco IOS Release 12.3(9) introduces additional MIB object enhancements for the DOCS-QOS-MIB on
the Cisco uBR10012 universal broadband router:
Refer to the
Note
additional information and MIBs constraints.
DSG-IF-MIB
The DSG-IF-MIB defines objects that are used to configure, control, and monitor the operation of the
DOCSIS Set-top Gateway (DSG) 1.0 feature on Cisco uBR7200 series and Cisco uBR10012 routers.
The MODULE-IDENTITY for the DSG-IF-MIB is dsgIfMib, and its top-level OID is
Note
1.3.6.1.4.1.9.9.999 (iso.org.dod.internet.private.enterprises.cisco.ciscoMgmt.dsgIfMib). Because this is
an experimental MIB, its top-level OID is expected to change when the DSG specifications are finalized.
OL-1520-05
ccsFlapListMaxSize—Reflects the flap list size, as configured by the cable flap-list size command.
ccsFlapListCurrentSize—Reflects the current size of the flap list for each MAC domain
(downstream).
Cisco CMTS Universal Broadband Router MIB Specifications Guide
Cisco CMTS Universal Broadband Router MIB Specifications Guide
Cisco CMTS Universal Broadband Router MIB Specifications Guide
Updated with the DOCSIS operations support system interface (OSSI) v2.0-N-04.0139-2.
The default values of docsQosPktClassIpSourceMask and docsQosPktClassIpDestMask objects are
set to 0xFFFFFFFF.
Cisco CMTS Universal Broadband Router MIB Specifications Guide
Supported Software Features for the Cisco uBR10012 Router
Cisco uBR10012 Universal Broadband Router Software Configuration Guide
on Cisco.com for
on Cisco.com for
on Cisco.com for
on Cisco.com for
1-73

Advertisement

Table of Contents
loading

Table of Contents