Handlebar Switches - Yamaha XV1700PCR Road Star Warrior Owner's Manual

Self diagnosis device
This model is equipped with a self-di-
agnosis device for various electrical cir-
cuits.
If any of those circuits are defective,
the clock display will indicate a two-dig-
it error code (e.g., 11, 12, 13).
If the clock display indicates such an
error code, note the code number, and
then have a Yamaha dealer check the
motorcycle.
CAUTION:
_
If the clock display indicates an er-
ror code, the motorcycle should be
checked as soon as possible in or-
der to avoid engine damage.
_
INSTRUMENT AND CONTROL FUNCTIONS
1. Dimmer switch "
2. Turn signal switch "
3. Horn switch " "
ECA00122

Handlebar switches

Dimmer switch "
Set this switch to "
beam and to "
Turn signal switch "
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
released, the switch returns to the cen-
ter position.
Since this model is equipped with a
self-canceling system, the turn signal
lights will self-cancel after the motor-
/ "
/ "
cycle has traveled both about 490 ft
(150 m) and for approximately 15 sec-
EAU00118
onds. However, the turn signal lights
can also be canceled manually by
pushing the switch in after it has re-
EAU03888
turned to the center position.
/ "
" for the high
NOTE:
" for the low beam.
_
The self-canceling system only oper-
ates when the motorcycle is moving, so
that the turn signal lights will not self-
cancel while you are stopped at an in-
tersection.
_
Horn switch "
Press this switch to sound the horn.
3-6
EAU04218
/ "
". To signal a left-hand
". When
EAU00129
"
3