Selecting The Video Quality (Recording Mode) - Canon LEGRIA HFM40 Instruction Manual

• Be sure to save your recordings regularly (0 127), especially after
making important recordings. Canon shall not be liable for any loss or
corruption of data.
• Photos recorded on an Eye-Fi card in memory card slot Y will be
uploaded automatically after setting the camcorder to playback mode, if
you are within the range of a configured network. Always verify that Eye-
Fi cards have been approved in the country/region of use. See also
Using an Eye-Fi card
NOTES
• The zoom, Quick Start function, power saving modes, etc. operate the
same way in
Mode
(0 42).
• Photos cannot be recorded while the digital zoom is activated or while
fading in or fading out a scene.
Reviewing the Latest Scene Recorded
You can review the last 4 seconds of the last scene recorded with the
camcorder without switching to playback mode. While reviewing the
latest scene, the picture will be played back without sound.
Operating modes:
1 Set the mode switch to y or
2 Review the last 4 seconds of the scene.
[FUNC.]

Selecting the Video Quality (Recording Mode)

The camcorder offers 5 recording modes. Changing the recording
mode will change the recording time available on the memory. Select
MXP or FXP mode for better movie quality; select LP mode for longer
recording times. The following table gives approximate recording
times.
Operating modes:
(0 140).
mode as in
8
[ Review Recording]
mode. For details, refer to
.
AUTO
81
Video