Using Headphones - Canon LEGRIA HFM40 Instruction Manual

Using Headphones

Use headphones for playback or to check the audio level while record-
ing. The headphones are connected to the AV OUT/X terminal, which
is used for both the headphones and the audio/video output. Before
connecting the headphones, follow the procedure below to change the
function of the terminal from AV output to X (headphones) output.
Operating modes:
* Headphones can be used also in
not be changed in this mode. Change the setting in advance in one of the other
operating modes.
1 Change the function of the terminal to headphones output.
[FUNC.]*
[Headphones]
* Only when performing the procedure in a recording mode.
2 Connect the headphones to the AV OUT/X terminal.
3 Adjust the volume as necessary.
[Volume]
** You can also drag your finger along the [Headphones] bar.
• J will appear on the screen.
To adjust the volume during playback
In mode, and in
the headphones volume the same way you adjust the speaker's vol-
ume (0 53).
*
8 8
[MENU]
8
[f]
8
[c] or [d]** to adjust the volume
mode during slideshow playback, adjust
mode but the function of the terminal can-
8
6
[AV/Headphones]
8
8
[a]
105
Video