Jensen VM9424BT Operating Instructions Manual page 112

9. Press Scale to set the map scale display preference for this trail.
10. Press the green check mark next to each scale setting to make your trail
visible at that scale.
11. Press the
12. Press the
13. Continue along your desired trail path and the stop the vehicle at the first
waypoint destination. Press the
as a waypoint. The "Name Waypoint Entry" screen appears:
14. Use the keyboard to enter a name for your waypoint and then press
to save and return to the navigation map.
15. Continue adding waypoints along the way until your trail is complete.
button to confirm and return to the "Setup Display" screen.
button again to save display settings and view the map.
Horizon NavMate 5
button to add your current position
106