Port Statistics View - Motorola 68384 - Vanguard 320 Router User Manual

S P E C T R U M E n t e r p r i s e M a n a g e r
DataBuffGauge
The maximum number of data buffers in use
since last reset.
MemAvailOnCard
Amount of memory available on the processor
card in bytes.
MemUsedForDataBuff
Amount of memory used for data buffers in bytes.
FlashModuleSize
The size of the flash module in bytes. This refers
to the currently selected bank of flash when there
is an alternate bank of flash installed.
CPUutil
Percentage of time the CPU processed traffic data
(as opposed to performing diagnositic tests or
processing node-control data) in the last 64
seconds.

Port Statistics View

Access: From the Icon Subviews menu for the
MotNodeMgmtApp Application icon, select Port Statistics.
This view contains a table of statistical
information about the modeled device's ports.
Buttons at the bottom of the view access separate
tables for receive, transmit, and error statistics.
Column headings for the main table are as
follows:
PortNo.
Identifies a particular port on the modeled device.
PortType
The type of port. The following values may appear:
illegal, null, pad, x25, mux, test, spare2, spare3,
spare4, mx25, spare, bsc2780, bsc3270, vip, pos,
sdlc, ncrbsc, fri, xdlc, bstd, rs366, spare5,
spare6, ibm2260, vap, tbop, n270, tcop, tr, sl,
and eth.
PortStatus
Current status of the port. The following values
may appear: disabled, enabled, busyOut, up,
down.
PortState
Current state of the port. "x28" indicates
command mode; "pad" indicates data mode.
PortSpeed
This is the speed of the port when Clock=Int; this
is detected clock speed if Clock=Ext. If Port Speed
is 0, Clock=Ext but clocking is not being received
from attached device.
PktsQueued
Number of packets currently queued for output.
The following three access buttons are located at
the bottom of the Node Statistics view.
52 of 95
M o t o r o l a V a n g u a r d D e v i c e s