Kompernass KH4083-10 Operating Instructions Manual page 13

➩ Select with the „+" button or the „–" button the desired weekday.
is shown in the display
on the programmed day.
➩ Press once on the
In the display y
med day. The bar shows the programmed weekday.
➩ Confirm your selection with the
➩ Select a programme number with the „+" or „–" button.
The number of the programme position is shown in the display
to the symbol.
➩ Confirm your selection with the
➩ Set the watering time as described under „Programming the
watering timings".
➩ Press the „M"-Button until a bar is shown over
display y .
The watering computer is now in automatic mode and will execute the
configured programs.
y on the left. Watering does not take place
button.
is shown. Watering takes place on the program-
- 11 -
button.
button.
in the
y next