Advertisement
Table of Contents
AIR NAILER/STAPLER
ASSEMBLY AND OPERATING INSTRUCTIONS
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
Copyright
2007 by Harbor Freight Tools
©
tained herein may be reproduced in any shape or form without the express written consent of Harbor Freight
Tools. Diagrams within this manual may not be drawn proportionally. Due to continuing improvements, actual
product may differ slightly from the product described herein. Tools required for assembly and service may not
be included.
For technical questions or replacement parts, please call 1-800-444-3353.
Revised Manual 10f
2-IN-1 KIT
Model
Visit our website at: http://www.harborfreight.com
. All rights reserved. No portion of this manual or any artwork con-
®
97525
Advertisement
Table of Contents
Related Manuals for Central Pneumatic Central Pneumatic Air Nailer/Stapler 2-in-1 Kit 97525
Summary of Contents for Central Pneumatic Central Pneumatic Air Nailer/Stapler 2-in-1 Kit 97525
- Page 1 Read this material before using this product. Failure to do so can result in serious injury. SAVE THIS MANUAL. Copyright 2007 by Harbor Freight Tools . All rights reserved. No portion of this manual or any artwork con- © ®...
-
Page 2: Specifications
Specifications Air Inlet 1/4” - 18 NPT Recommended Air Pressure 60 - 100 PSI, 100 PSI Max. Magazine Capacity 100 Nails or 80 Staples Safety Feature Single Sequential Safety Trip Mechanism Nail Size .039-.042” Shank (18 Gauge), ” - 1- ”... - Page 3 Use of any other parts will void the warranty. Only use accessories intended for use with this tool. Approved accessories are available from Harbor Freight Tools. 17. Do not operate tool if under the influence of alcohol or drugs. Read warning labels if taking prescription medicine to determine if your judgement or reflexes are impaired while taking drugs.
- Page 4 heating up. Otherwise, the extension cord could melt and catch fire, or cause electrical damage to the tool. Check your air compressor’s manual for the appropriate size cord. It is also possible that the use of an extension cord may cause your circuit breaker to trip or your panel fuse to break.
-
Page 5: Testing Single Sequential Safety Trip Mechanism
Unpacking When unpacking, check to make sure the parts listed on page 9 are included. If any parts are missing or broken, please call Harbor Freight Tools at the number on the cover of this manual as soon as possible. -
Page 6: Loading Nails Or Staples
Operation - (continued) Testing The Single Sequential Safety Trip Mechanism Empty the magazine of nails or staples. Check that the Trigger (38) and the Safety (42) on the nose of the tool, move freely, without sticking. Connect the air supply to the tool at the Air Plug (77) and set at the recommended 60- 100 PSI, and not over the maximum 100 PSI. -
Page 7: Clearing Jams
Anytime any maintenance or repairs are done (including clearing jams), FIRST: Disconnect the Nailer/Stapler from the air hose. Empty Magazine A (61) completely. Attempt to fire the Nailer/Stapler into a piece of scrap wood to ensure that it is disconnected and is incapable of firing any staples. Always leave Magazine A (61) open during maintenance. -
Page 8: Troubleshooting Guide
Anytime any maintenance or repairs are done, FIRST: Disconnect the Nailer/Stapler from the air hose. Empty Magazine A (61) completely. Attempt to fire the Nailer/Stapler into a piece of scrap wood to ensure that it is disconnected and is incapable of firing any staples. Always leave Magazine A (61) open during maintenance. -
Page 9: Parts List
Maintenance Warning! Always disconnect the tool from the air compressor and then empty the magazine of nails or staples before attempting to inspect or perform maintenance to the Nailer/ Stapler. Inspect all of the nuts and screws and make sure they are securely fastened. Periodically lubricate the driving mechanism and magazine with a light oil. -
Page 10: Assembly Drawing
NOTE: Some parts are listed and shown for illustration purposes only and are not available individually as replacement parts. SKU 97525 For technical questions, please call 1-800-444-3353. Page 10... - Page 11 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of pur- chase.