Changing The Display Language; Printing Menu Settings; Menu Functions - Oki B4100 User Manual

The menu functions and their default values are summarised in the
table in the section entitled "Menu Functions".

CHANGING THE DISPLAY LANGUAGE

Carry out the following instructions to change the language that is
displayed in the Status Monitor.
1. Start the Status Monitor.
2. Select the Printer Setup tab.
3. Click the Printer Menu button.
4. On the Maintenance 2 tab, select the required language in the
[Language] dropdown menu.
5. Click on [OK].

PRINTING MENU SETTINGS

The menu settings can be printed as a menu map as follows.
Using the control button
1. Press the control button to take the printer off-line.
2. Press and hold down the control button for at least two
seconds, but less than five seconds.
3. The printer prints a list of the menu settings and a demo print
page.
Demo and menu pages can also be printed using the printer Status
Monitor.

MENU FUNCTIONS

This section summarises the menus accessed via the Status Monitor.
The printer menu settings can be seen collectively on a printed Menu
Map. (For details of how to print such a map, see "Printing menu
settings".)
NOTE
OPERATOR PANEL AND STATUS MONITOR > 20