Access Points; Configuring The Wap Device For Single Point Setup - Cisco WAP121 Administration Manual

Single Point Setup

Access Points

Access Points
Cisco Small Business WAP121 and WAP321 Wireless-N Access Point with PoE
Radio Configuration Settings and Parameters that are Not Propagated in
Single Point Setup
Transmit Power
Other Configuration Settings and Parameters That Are Not Propagated in
Single Point Setup
Bandwidth Utilization
Bonjour
IPv6 Address
IPv6 Tunnel
Packet Capture
The Access Points page allows you to enable or disable Single Point Setup on a
WAP device, view the cluster members, and configure the location and cluster
name for a member. You can also click the IP address of a member to configure
and view data on that device.

Configuring the WAP Device for Single Point Setup

To configure the location and name of an individual Single Point Setup cluster
member:
Port Settings
VLAN and IPv4
WDS Bridge
WPS
WorkGroup Bridge
10
162