Viewing The Ip Configuration Window; Configuring An Ip Interface - Cisco 12000 User Manual

IP Configuration

Viewing the IP Configuration Window

To view the IP Configuration window, proceed as follows:
Step 1 Right-click a selected IP line card or IP interface, then choose Cisco 12000/10720 Manager>
Configuration>IP>Configuration. The IP Configuration window appears, with the Generic Parameters
tab displayed.
Figure 8-5
Choose a Chassis, Module, and IP Interface from the lists displayed at the left of the window.
Step 2

Configuring an IP Interface

To configure an IP Interface, follow these steps:
Open the IP Interface Configuration window. See
Step 1
page 8-14
Choose a Chassis, Module, and IP Interface from the lists displayed at the left of the window.
Step 2
Configure the parameters displayed in the Generic Parameters tab, as required. See
Step 3
Window—Detailed Description" section on page 8-15
Cisco 12000/10700 v3.1.1 Router Manager User Guide
8-14
IP Configuration Window—Generic Parameters Tab
for further details.
Chapter 8
"Viewing the IP Configuration Window" section on
for further details.
Interface Configuration
"IP Configuration
OL-4455-01