Configuration Backup/Restore Using Rme; Ios Image Download Using Rme; Aps Status; Viewing The Aps Status Window - Cisco 12000 User Manual

APS Status

Configuration Backup/Restore Using RME

You should use Cisco IOS Configuration Archiving in RME for Configuration backup and restore.
For more information about configuration backup and restore in RME, refer to User Guide for Resource
Manager Essentials.
http://www.cisco.com/en/US/products/sw/cscowork/ps2073/products_user_guide_book09186a008017
ac58.html.

IOS Image Download Using RME

You should use Cisco IOS Image Management in RME for IOS Image Download.
For more information about IOS image download in RME, refer to User Guide for Resource Manager
Essentials.
http://www.cisco.com/en/US/products/sw/cscowork/ps2073/products_user_guide_book09186a008017
ac58.html.
APS Status
The APS status window provides a single read only view which displays all APS circuits configured on
a selected Cisco 12000/10720 Router.
You can also view APS circuits that are configured on another router.
Note
The APS Status window displays the APS redundancy configuration for a selected chassis.
The APS Status section contains the following areas:
•
•

Viewing the APS Status Window

To view the APS Status window, proceed as follows:
Step 1 Right click on the chassis object and select the Fault>POS APS Status option. See
page 4-2
window appears.
Cisco 12000/10700 v3.1.1 Router Manager User Guide
4-32
Viewing the APS Status Window
APS Status Window—Detailed Description
for information on which objects allow you to launch the APS Status window. The APS Status
Chapter 4 Managing Chassis
Table 4-1 on
OL-4455-01