Haier HW–D1270TVE ME User Manual page 17

WATER INLET AND INLET FILTER
To prevent blockage to the water supply by ingress of foreign substances, clean the water inlet and inlet
fi lter regularly.
MOVING THE MACHINE
If the machine is to be moved to a distant location, replace the transportation locks removed before installation to prevent damage as
shown below.
1. Remove the blanking plugs.
2. Remove the back cover
3. Insert the synthetic stabilisers and the transportation bolts.
4. Tighten the bolts with a spanner.
5. Replace the back cover.
LONG PERIODS OF DISUSE
If the washing machine is left idle for a long period, pull out the electrical plug and turn off the water
supply. Open the washer door to prevent formation of moisture and odours. Let the door open while not
used.
MAINTENANCE
1.
2.
3. 4.
5.
17
Power
pre-
Wash Rinse Spin Dry Wash Rinse Spin Temp Silk ON
wash
OFF
Speed Quickwash Sport
Wool Quick Wash
Synthetics Rinse
Delay Delay Extra rinse Extra Rinse Dry EcoTime Eco Start/ Start/ Pause
rinse hold Pause Spin
Prewash Drain