Haier HW–D1270TVE ME User Manual page 14

14
SETTING WASHING TEMPERATURE
Press and hold down the temperature button until the desired temperature is selected or the symbol "--"
for no water heating.
SETTING SPIN SPEED
Press and hold down the speed button until the desired speed is selected or the symbol "0" is selected
for no spin. See "Operational functions" on the "Control panel" pages (08 and 09) for selecting
temperature and spin speed. It is advisable to select the recommended value.
WASHING
Press the Start/Pause button. The washing machine will operate according to the pre-set programs.
The washing machine will stop operation automatically when a washing cycle ends. The "End" sign will
appear on the display. Open the washer door and take out the laundry.
AFTER WASHING
Turn off the water supply and unplug the power cord. Open the washer door to prevent formation of
moisture and odours. Let the door open while not used.
TIPS FOR SAVING ENERGY
1. Collect clothes for one full wash load.
2. Avoid overloading the washing machine.
3. Pre-wash only heavily soiled clothes.
4. Reduce the amount of detergent or choose the speed up wash programs for slightly soiled clothes.
5. Choose a proper washing temperature. Modern detergents can wash with very good result already in lower temperature than
60°C. Only user higher temperature than 60°C for heavily soiled laundry.
6. Follow the dosage recommendation on the detergent package to avoid using too much detergent.
USING THE APPLIANCE
y se EcoTime Start/
Eco Start/
Pause
Pause
d
y se EcoTime Start/
Eco Start/
Pause
Pause
d
pre-
Wash Rinse Spin Dry
Wash Rinse Spin
wash
Delay Extra Rinse Dry
Delay Extra
rinse
rinse hold
pre-
Wash Rinse Spin Dry Wash Rinse Spin
wash
Delay Extra Dry EcoTime Start/
Delay rinse Extra Rinse Eco Pause Start/
rinse hold Pause
Temp
Speed
Temp
Speed
Temp
Speed
EcoTime Start/
Eco Start/
Pause
Pause
Power
Temp Silk ON
OFF
Speed Quickwash Sport
Quick Wash
Wool
Synthetics Rinse
Cotton&Linen Spin
Prewash Drain