Mercedes-Benz SLK350 Operator's Manual page 96

Seats
94
! To avoid damage to the seats and the seat
heating, observe the following information:
do not spill any liquids on the seats. If
R
liquid is spilled on the seats, dry them as
soon as possible.
if the seat covers are damp or wet, do not
R
switch on the seat heating. The seat
heating should also not to be used to dry
the seats.
clean the seat covers as recommended;
R
see the "Interior care" section.
do not transport heavy loads on the
R
seats. Do not place sharp objects on the
seat cushions, e.g. knives, nails or tools.
The seats should only be occupied by
passengers, if possible.
when the seat heating is in operation, do
R
not cover the seats with insulating
materials, e.g. blankets, coats, bags,
seat covers, child seats or booster seats.
! Make sure that there are no objects in the
footwell or behind the seats when resetting
the seats. There is a risk that the seats
and/or the objects could be damaged.
i
The head restraints are equipped with the
NECK-PRO system (
reason, it is not possible to remove the
head restraints from the seats.
For more information, contact a qualified
specialist workshop.
Adjusting the seats manually
page 47). For this
Y
Seat fore-and-aft adjustment
Lift handle : and slide the seat forwards
X
or backwards.
Release lever : again.
X
Make sure that you hear the seat engage in
position.
Backrest angle
Relieve the pressure on the backrest.
X
Pull handle ; and adjust the backrest to
X
the desired angle.
Release handle ; again.
X
The backrest must audibly engage.
Seat height
Pull handle = upwards or push it down
X
repeatedly until the seat has reached the
desired height.
Adjusting the seats electrically
Backrest angle
:
Seat fore-and-aft adjustment
;
Seat cushion angle
=
Seat height
?
i
You can store the seat settings using the
memory function ( page 100).
Y