Low-Beam Headlamps - Mercedes-Benz SLK350 Operator's Manual

Tail lamp
Backup lamp: W 16 W
:
Changing the front bulbs
Removing and installing the cover in the
front wheel housing
You must remove the cover from the front
wheel housing before you can change the
front bulbs.
To remove: switch off the lights.
X
Turn the front wheels inwards.
X
Slide up cover : and lift it out.
X
To install: insert cover : again and slide
X
it downwards until it engages.
Replacing bulbs
Low-beam headlamps (halogen
headlamps)
Remove the cover in the front wheel arch
X
( page 111).
Y
Turn housing cover : counter-clockwise
X
and pull it out.
Press clamp ; upward.
X
Pull out connector = with the bulb.
X
Take the bulb out of connector =.
X
Attach the new bulb to connector = and
X
insert it into the bracket of clamp ;.
Make sure the bulb is positioned correctly.
Press clamp ; downward.
X
Attach housing cover : and turn it
X
clockwise until it engages.
Replace the cover in the front wheel arch
X
( page 111).
Y
High-beam headlamps (halogen
headlamps)/cornering lamps (Bi-Xenon
headlamps)
111
Z