Table of Contents
Advertisement
PULLOUT DRAWERS
Top Drawer
1. To remove, pull the drawer out to full extension. On
the left rail, use a fiat blade screwdriver
to push in on
the tab to release the drawer
from the rail, as shown
below. Once the left side is loose, push the tab on the
right side with your finger to release the drawer. Lift
the front of the drawer
up, then pull it straight out.
2. To replace, slightly tilt up the front of the drawer,
insert the drawer
into the frame, and push it back into
place.
2. To replace, slightly tilt up the front of the drawer, insert
the drawer
into the frame, and push the drawer
back
into place until you hear a click.
DURABASE
1. To remove the Durabase,
push it to the back as much
as possible. Tilt up the front of the Durabase and pull
straight out.
2. To replace, insert the Durabase in the rail assembly.
Middle
Drawer
1. To remove, pull the drawer out to full extension. Lift the
front of the drawer up, then pull it straight out.
DURABASE DIVIDER
The Durabase divider
allows you to organize
the
Durabase area into sections. It can be adjusted
from side
to side to accommodate
items of different
sizes.
WARNING:
If the Durabase divider
is removed, there is
enough open space for children
or pets to crawl inside.
To prevent accidental
child and pet entrapment
or
suffocation
risk, DO NOT allow children or pets to
touch or go near the drawer.
29
Advertisement
Table of Contents
