Table of Contents
Advertisement
Operation
* In this manual, the OSD (On Screen Display) may be different from your TV's because it is just an
example to help you with the TV operation.
1.
First, connect power cord correctly. At this moment, the TV switches to standby mode.
In standby mode to turn TV on, press the 0/I, TV/VlDEO
_, CH (_, / •) button on the TV or press the POWER,
TV INPUT, TV/VIDEO,
CH (_, / •), Number (0 ~ 9) button on the remote control.
2.
Select the viewing source by using TV/VIDEO button on the remote control.
This TV is programmed
to remember which power state it was last set to, even if the power cord is out.
3. When finished using the TV, press the POWER button on the remote control. The TV reverts to standby mode.
up
- The menus can be shown on the screen in the selected language. First select your language.
1. Press the MENU button and then use A / •
button to select the OPTION
menu.
2. Press the IP- button and then use A / •
button to select Language.
3. Press the IP- button and then use A / • button to select your desired language.
From this point on, the on-screen
menus will be shown in the selected
lan-
guage.
4. Press EXIT button to return to TV viewing or press MENU button to return to
the previous menu.
21
Advertisement
Table of Contents
