Table of Contents
Advertisement
Installation
How to connect
Connect the audio and video cables from the external equip-
ment's output jacks to the TV input jacks, as shown in the
figure.
When connecting
the TV to external equipment,
match the
jack colors (Video = yellow, Audio Left = white, and Audio
Right = red).
How to use
1. Select the input source with using the TV/VIDEO button on
the remote control. Note that this TV finds the connected
input sources automatically
for Video, Front Video and
Component
1-2. It is presumed that RGB and HDMI/DVI
sources are connected.
2. Operate the corresponding
external equipment.
Camcorder
Video Game
Device
DVD
How to connect
1. Connect the DVD video outputs (Y, PB, PR) to the COMPONENT
(Y, PB, PR) INPUT jacks
on the TV and connect the DVD
audio outputs to the AUDIO INPUT jacks on the TV, as shown in the figure.
2. If your DVD only has an S-Video output jack, connect this to the S-VIDEO input on the TV and connect the DVD audio outputs
to the AUDIO INPUT jacks on the TV, as shown in the figure.
Note: If your DVD player does not have component
video output, use S-Video.
How to use
1. Turn on the DVD player, insert a DVD.
2. Use the TV/VlDEO
button on the remote control to select Component
1 or Component
2. (If connected to S-VIDEO, select
the Video or Front Video external input source.)
3. Refer to the DVD player's manual for operating instructions.
• Component
Input ports
To get better picture quality, connect a DVD player to the compo-
nent input ports as shown below.
Component
ports
y
on the TV
Video output ports
on DVD player
14
Advertisement
Table of Contents
