Changing; Setting Timer - Kenmore 790. 7260 Use & Care Manual

Setting Oven Controls
Changing temperature display (°F or °C)
The electronic oven control is set to display °F (Fahrenheit)
when shipped from the factory. The display may be
changed to show either Fahrenheit or Celsius oven
temperatures.
To change temperature display mode from °F to °C
(Celsius) or from °C to °F (Fahrenheit):
1. Press Broil key pad. ---- appears in the display.
2. Press and hold A until HI appears in display.
3. Press and hold Broil key pad until F or C appears in the
display.
4. Press either A or V key pad to toggle between F
(Fahrenheit) or C (Celsius) mode choices. Release key
pad when desired mode is displayed.
5. To accept selection, press any control key pad once. The
display will return to the time of day.
Important note:
The temperature display mode cannot be changed when
the oven is set for cooking or Select Clean is active.
Changing between continuous bake setting or
12-Hour Energy Saving feature
The oven control has a factory preset 12-Hour Energy
Saving feature that will turn the oven off automatically if
the oven is left on for more than 12 hours. The control may
be programmed to override this feature to continuously
bake.
To change to continuous bake mode:
Press and hold Timer Set/Off key pad until the control
beeps once (about 6 seconds). - - hr will appear in
display indicating the control is now set for continuous
bake setting.
To change to 12-Hour Energy Saving feature:
Press and hold Timer Set/Off key pad until the control
beeps once (about 6 seconds). 12hr will now appear in
display indicating the control is set for 12-Hour Energy
Saving feature.
Important note:
Changing between continuous bake or the 12-Hour Energy
saving mode does not change how the cooktop controls
operate.
Setting Timer
The timer allows you to track your cooking times without
interfering with the cooking process. The timer may be set
from 1 minute up to 11 hours and 59 minutes.
To set the timer:
1. Press Timer Set/Off key pad.
2. Press the A to increase the time in one minute
increments. Press and hold A to increase the time in
10 minute increments. Release A when the desired
time appears in the display. The timer will begin to count
down.
3. When the set time has run out, the Timer will sound with
3 beeps and will continue to beep 3 times every 60
seconds until Timer Set/Off key pad is pressed.
To change time remaining in Timer:
While the timer is active, press and hold the A or V
key pad to increase or decrease any time remaining.
To cancel the Timer before the set time has run out:
Press Timer Set/Off key pad once.
Important notes:
• The timer does not start or stop the cooking process. It
serves as an extra timer in the kitchen that will beep
when the set time has run out. The timer may be used
alone or when any other oven function is active.
• The indicator light located above the Timer Set/Off key
pad will glow when the timer is active.
The timer will display hours and minutes until 1 hour
remains. When less than 1 hour remains, the display will
count down in minutes and seconds. Once the timer has
less than 1 minute remaining only seconds will display.
If the timer is active when oven cooking, the minute timer
will show in the display by default. To view information of
any other active oven function, press the key pad once
for the active function to view status.
12