Kenmore 240570401 Use & Care Manual page 12

TALL BOTTLE RETAINER (SOME MODELS)
The Tall Bottle Retainer keeps tall containers in the bin
from falling forward when opening or closing the
refrigerator door. To install, hold the retainer at the top, and
slide it over the outside walt of the bin, as shown in the
diagram. The Tall Bottle Retainer works best with a Bin
Snugger.
HUMIDITY CONTROL (SOME MODELS)
The Humidity Control, present on some models with
crisper drawers, allows you to adjust the humidity within
the crisper. This can extend the life of fresh vegetables
that keep best in high humidity.
!i_i ii!
Tall Bottle Retainer (left) and Bin Snugger (right)
CRISPERS (SOME MODELS)
The crispers, located under the bottom refrigerator shelf,
are designed for storing fruits, vegetables, and other fresh
produce. Wash items in clear water and remove excess
water before placing them in the crispers. Items with
strong odors or high moisture content should be wrapped
before storing.
Crisper Drawer
Crisper Humidity Control
DELl DRAWER (SOME MODELS)
Some models are equipped with a Dell Drawer for storage
of luncheon meats, spreads, cheeses, and other deli
items.
WINE RACK (SOME MODELS)
There are two different style Wine Racks. (See A and B
below.) The Wine Rack stores bottles of wine, or single two-
liter plastic bottles of juice or soda pop. To install, slide
Wine Rack (A) onto the shelf with the curve facing in. To
remove, slide the Wine Rack out. Install on either side of
shelf. The Wire Wine Rack (B} simply sets on the shelf.
Wine Racks
12