Kenmore 253.18502 Use & Care Manual page 10

Table of Contents

Advertisement

Before You CalJ
Problem
i Cause
i Correction
SOUND AND NOISE (cont.)
Popping or cracking
*
Metal
parts undergo
expan-
*
This is normal. Sound will level off: or disappear
as
sound when
corn=
sion and contraction, as in hot
freezer
continues to run.
pressor comes on.
water
pipes.
Bubbling
or gurgling
Refrigerant
(used to cod
This is normal.
sound, like water
freezer)
is circulating
boiling,
throughout
the system.
Vibrating or rattling
noise.
Freezer is not level, it rocks
on the floor when it is moved
slightly.
Floor is uneven or weak.
Freezer
rocks on floor when it
is moved slightly.
Freezer is touching
the wall.
Level the unit. Refer to ....Leveling .... in the Installa=
tion Section.
*
Ensure floor can adequately
support
freezer.
Level
the freezer
by putting
wood or metal
shims under
part of the freezer.
*
Relevel the freezer
or move freezer
slightly.
Refer to
"Leveling"
in the Installation
Section.
WATER/MOISTURE/FROST INSIDE FREEZER
*
Weather is hot and humid.
Moisture
collects
on inside of freezer
walls.
*
Lid may not be seating
prop-
erly.
*
Lid is opened
too often or too
long.
*
The rate of frost buildup
and internal
sweating
increases. This is normal.
*
See "LID PROBLEMS".
*
Open
lid less often.
WATER/MOISTURE/FROST OUTSIDE FREEZER
Moisture collects on
*
Lid may not be seating prop-
*
See "LID PROBLEMS".
outside of freezer,
erly, causing cold air from
inside freezer to meet warm
air from outside.
ODOR IN FREEZER
Odors in freezer.
*
interior needs to be clean.
*
Clean interior with sponge, warm water, and baking
soda.
Foods with strong odors are in
*
Cover the food tightly.
the freezer.
LiD PROBLEMS
Lid will not dose
Freezer is not level, it rocks
on the floor when it is moved
slightly.
Floor is uneven or weak.
Freezer
rocks on floor when it
is moved slightly.
This condition
can force the cabinet
out of square
and misalign
the lid. Refer to "Leveling"
in the In=
stallation
Section.
Level the floor
by using wood or metal
shims under
the freezer
or brace floor supporting
the freezer.
POWER AVAILABLE LIGHT IS NOT ON
Power Available
_ *
LED may be burned out.
_ *
Contact
a Sears or other qualified
service dealer.
light is not on.
_ *
No electric
current is reaching
_ *
See "Freezer
does not run"
in the "RUNNING
OF
the freezer.
FREEZER"Section.
10

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

253.18702

Table of Contents