Loading Suggestions - Kenmore Electronic Three-Speed Automatic Washers Owner's Manual & Installation Instructions

LOADING LOADING SUGGESTIONS
Proper loading of your washer
contributes to proper cleaning and
fabric care and reduces machine
noise.
• Drop items into washer loosely. Fill to
the top of the basket (top row of holes).
Do not wrap items around the agitator.
Items should move easily through wash
water for best cleaning and wrinklefree
results. Items should sink and reappear
laten
• Load washer properly and select
correct water level setting. Overloading
or packing the machine, and selecting a
setting too small for the wash load can:
- cause poor cleaning
- increase wrinkling
- create excessive lint
wear out items faster
(because of pilling)
• Load by the amount of space items
take up, not by their weight.
• Mix large and small items in each load.
Load evenly to maintain washer
balance. An off-balance load can make
the washer vibrate during spin.
• Use a higher water level setting to
reduce wrinkling with permanent press
clothes and some synthetic knits. These
items should have more room to move
in the water than heavy items (towels,
jeans).
• Reduce wash time by using a lower
water level setting. Loads with only a
few small items need less wash time.
For these suggested full-sized loads,
set the Water Level to the highest water
level setting.
King Size Capacity Washers
Heavy Work
Clothes
4 jeans
4 workpants
4 workshids
2 sweatsbirts
2 sweatpants
Towels Mixed Load
10 bath towels 3 sheets
10 hand towels (1 king, 2 twin)
14 wash cloths 4 pillowcases
3 shirts
3 blouses
g T-shirts
9 shorts
10 handkerchiefs
4O