GE GTWN4950D Specification

GTWN4950D
GE 4.0 DOE cu. ft. stainless steel capacity washer
®
Dimensions and Installation Information (in inches)
Circuit Requirements: An individual, properly-grounded branch
circuit, with a three-prong grounding-type receptacle, protected
by a 15 or 20 amp circuit breaker or a time-delay fuse, is required.
Electrical Rating: 115V, 60Hz, 10A
Note: Washer wall outlet must be located within 36" of service
code entry. Wall outlet must not be located behind dryer.
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
For answers to your Monogram, GE Profile
®
GE ® appliance questions, visit our website at
geappliances.com or call GE Answer Center
service, 800.626.2000.
or
™
®
25-1/2
36
Side View
23-1/2
25-3/4
25-1/2*
27
51
42
Rear View
*24-1/2" from the edge of the side panel to the front.
25-1/2" from front to edge of endcaps.
Specification Revised 3/13
Listed by
Underwriters
Laboratories
27
360112