GE GTWN4250M Dimensions And Installation Information

3.7 cu. ft. stainless steel capacity washer

Hide thumbs Also See for GTWN4250M:

Download this manual See also: Owner's Manual

GTWN4250M

3.7 cu. ft. stainless steel capacity washer

Dimensions and Installation Information (in inches)

Circuit Requirements: An individual, properly-grounded branch

circuit, with a three-prong grounding-type receptacle, protected

by a 15 or 20 amp circuit breaker or a time-delay fuse, is required.

Electrical Rating: 120V, 60Hz, 10A

Note: Washer wall outlet must be located within 36" of service

code entry. Wall outlet must not be located behind dryer.

Installation Information: Before installing, consult installation

instructions packed with product for current dimensional data.

For answers to your Monogram,

GE Profile

appliance questions, visit our website at

ge.com or call GE Answer Center

800.626.2000.

™

service,

25-1/2

Side View

Rear View

Specification Revised 9/10

Listed by

Underwriters

Laboratories

360196

Page 1 15 or 20 amp circuit breaker or a time-delay fuse, is required. Electrical Rating: 120V, 60Hz, 10A Note: Washer wall outlet must be located within 36” of service code entry. Wall outlet must not be located behind dryer.
Page 2 *Compared to a non-HydroWave washer, WDSR2120 • PreciseFill with 5 water level selections - Washer will automatically measure the load size and add just the right amount of water, or choose from 5 pre-set water levels •...

Gtwn4250mws