Air Conditioner Features - Kenmore 580.72087200 Owner's Manual

CONTROLS
MODE
OFF
0
FAN.AN
J:
HEAT COOL
TEMP
OFF
FAN ONLY
LOW COOL
HIGH COOL
LOW HEAT
HIGH HEAT
: Turns air conditioner off.
: Fan operationwithout cooling or heating.
: Cooling with low fan speed operation.
: Cooling with high fan speed operation.
: Heating with low fan speed operation.
: Heating with high fan speed operation.
Turn the TEMP dial to a higher number for a cooler room temperature.
Position 5 or 6 is a normal setting for average conditions.
• FOR NORMAL COOLING
1. Turn the Operation Knob to the High Cool from
the Low Cool setting.
2. Set the Thermostat control to the desired
temperature mark 5 (the mid-point is a good
starting position). If the room temperature is not
satisfactory after a reasonable time, adjust the
control to a cooler or warmer setting, as
appropriate.
• FOR MAXIMUM COOLING
1. Turn the Operation Knob to the High Cool
setting.
2. Set the Thermostat control to the largest 9
temperature mark.
• FOR QUIETER OPERATION
1. Turn the Operation Knob to the Low Cool
setting.
2. Set the Thermostat control as needed.
• ENERGY SAVER (optional)
On : Both the fan and the compressor turn on and
turn off together while operation knob is set to
the Cool position.
You can get the more economical operation.
Off : The fan runs constantly while operation knob
is set to the Cool position.
Energy Saver
On
You can access the Energy Saver switch when you
open the inlet grille.
-14-