Furuno FAX-410 Operator's Manual page 12

Channel key
CH
Clear key
C
Record key
RCD
○ key
5
N
Number key
0～9
Entry key
E
: For selection of
mode, and for shift to the channel setting in the
channel mode. For setting a channel,
press key and enter channel number with
CH
three keys.
N
0～9
The channel covers 000～406 (existent frequency)
and 410～733 (new frequency).
: For deletion of memorized value in a set mode and
for return to the standard operation mode from a
set mode.
: To start and stop recording. In the non-recording
mode, a press of
mode and recording starts when phasing is
completed. In the automatic phasing, a press of
key stops the automatic phasing and starts
RCD
recording. A press of
stops recording.
: Time display (clock function)
: To enter number or mode.
: To acknowledge setting.
- 6 -
channel mode from frequency
key sets automatic phasing
RCD
key while recording
RCD