Belkin N300 User Manual page 51

INTERNET
Point-to-Point Tunneling Protocol (PPTP)
WAN Interface Type
Hostname
MAC address
Username
Password
Service IP Address
Connection ID
MTU
Type
Idle Timeout:
Select whether the ISP is set to Static IP or will allocate a Dynamic IP address.
This is optional. Only required if specified by ISP.
The MAC Address that is used to connect to the ISP.
Username assigned to you by the ISP.
Password for this username.
The IP Address of the PPTP server.
This is optional. Only required if specified by ISP.
The maximum size of packets.
Do not change unless mentioned by the ISP.
You can choose the method that the router maintains a connection with the ISP.
Keep Connection: The device will maintain a constant connection with the ISP.
Automatic Connection: The device will only initiate a connection to the ISP when there is
an Internet connection request made from a LAN device.
Manual Connection: The user will need to manually connect to the ISP by clicking the Connect button.
When the connection type is Automatic Connection, when Internet traffic is
idle, then the device will automatically disconnect from the ISP.
Please specify the Idle time in minutes.
48