Belkin N300 User Manual page 100

VPN
L2TP
L2TP
Select the desired authentication
Authentication protocol (PAP, CHAP, MSCHAP_V2).
Select MSCHAP_V2 by default
Select accounts form available to member
for authentication. You should set these
Account
available users in user setting page.
Network
Network
Assign the VPN Server IP address.
Server IP
(example: 192.168.99.1)
Assign a range of IP addresses. The assigned
IP range should be on the same range as the
Remote IP Range
Server IP (example: 192.168.99.21 – 50)
97