Panasonic CF-19 Series Reference Manual page 76

Troubleshooting (Advanced)
Touch Pad / Touchscreen (only for model with touchscreen)/Digitizer (only for
model with digitizer)
The cursor does not work.
Cannot input using the touch pad.
Cannot point the correct position using
the included stylus/pen.
PC Card / ExpressCard
A card does not work.
SD Memory Card
Cannot use an SD Memory Card.
Cannot use SD security function.
Cannot log on using the SD Memory
Card.
Connect the external mouse correctly.
Restart the computer using the keyboard.
, U, and R to select [Restart].)
(Press
If the computer does not respond to keyboard commands, read "No response"
( page 77).
Set [Touch Pad] to [Enable] in the [Main] menu of the Setup Utility (
The touch pad may be disabled by some mouse drivers. Check your mouse's
operating instructions.
<Only for model with touchscreen>
Perform the touchscreen calibration (
<Only for model with digitizer>
Perform the digitizer calibration (
Insert the card correctly.
The card does not conform to the card standard.
Restart the computer after installing a driver (of card or other device).
Set [PC Card Slot] and [ExpressCard Slot] to [Enable] in the [Advanced] menu
of the Setup Utility ( page
The port settings are not correct.
Read the instruction manual of the card or contact the manufacturer of the card.
Remove the card and insert it again (
The driver is not compatible with the operating system.
Set [SD Slot] to [Enable] in the [Advanced] menu of the Setup Utility (
61).
Setup the SD Memory Card (
You cannot use SD security together with fingerprint security (optional).
The user name and password set in the SD Memory Card are not correct.
Enter the correct user name and password, and log on to Windows without
using the SD Memory Card. Set the correct user name and password in [SD
Card Setup] ( page 31).
page 7).
page 8).
61).
page 26).
page 31).
76
page 59).
page