Wireless Communication Hot Key; Lan; Lan Cable Types - Toshiba Satellite C650D Series User Manual

■
TOSHIBA is not liable for the eavesdropping of data due to the use of
Wireless LAN and the damage thereof.

Wireless Communication Hot key

You can enable or disable RF transmission(Wireless LAN, etc.) functions
on and off by pressing FN+F8. No transmissions are sent or received when
the function is off.
Set the function to off in airplanes and hospitals.
Turn the computer off when you enter an airplane and check the carrier's
regulations before you use a computer on board.

LAN

The computer has built-in support for Fast Ethernet (10BASE-T/100BASE-
TX). This section describes how to connect/disconnect to a LAN.
Do not install or remove an optional memory module while Wake-up on
LAN is enabled.
The Wake-up on LAN function consumes power even when the system is
off. Leave the AC adaptor connected while using this feature.

LAN Cable Types

The computer must be configured properly before connecting to a LAN.
Logging onto a LAN using the computer's default settings could cause a
malfunction in LAN operation. Check with your LAN administrator
regarding set-up procedures.
If you are using Fast Ethernet LAN (100 megabits per second, 100BASE-
TX), be sure to connect with a CAT5 cable or higher. You cannot use a
CAT3 cable.
If you are using Ethernet LAN (10 megabits per second, 10BASE-T), you
can connect with a CAT3 or higher cable.
User's Manual
Operating Basics
4-26