Charging The Battery - Sony SGPT11 Series Help Manual

Troubleshooting
Preparations
Parts and Controls
Basic Operations
Connections
Other Operations
Apps
Announcements
SGPT11 Series
Back to Top

Charging the Battery

The battery charges while your tablet device is plugged in. Charging time will vary depending on
how you use your tablet device.
1. Plug the AC power cord (mains lead) into the AC adapter.
2. Plug the other end of the AC power cord (mains lead) into an AC outlet (wall socket).
3. Turn over your tablet device, and then plug the AC adapter into the charge connector of your
tablet device in the direction shown below.
The charge indicator shows the battery charging status.
Hint
Using the designated Sony cradle (SGPDS1, sold separately) for your tablet device allows you
to charge the battery easier.
Checking the remaining battery level/charging status
You can check the remaining battery level with the icon displayed on the status bar on the Home
screen.
The charge indicator tells you the charging status. The charge indicator lights up in different colors,
depending on the remaining battery level.
Charging status Remaining battery level Display status
Low (0 - 15 %)
With the AC adapter Mid (16 - 89 %)
Full (90 - 100 %)
Low (0 - 15 %)
Without the AC adapter Mid (16 - 89 %)
Full (90 - 100 %)
177
Search
Red
Orange
Green
Red flashing
Off
Off