Table of Contents
Advertisement
To receive data using the Bluetooth wireless feature:
1. In Idle mode, select Applications → Settings →
Wireless and network → Bluetooth settings →
Visible.
Your phone is visible to other Bluetooth phones for 120
seconds.
2. When prompted, enter the PIN for the Bluetooth
wireless feature and select OK (if necessary).
3. Select Accept to confirm that you are willing to receive
data from the phone (if necessary).
Received data is saved to the appropriate application or to a
folder according to its type. For example, a music or sound
clip is saved to the sound folder and a contact to the
phonebook.
Wi-Fi
You can use your phone's wireless networking capabilities
to activate and connect to any wireless local area network
(WLAN) compatible with the IEEE 802.11 b/g/n standards.
You can connect to the internet or other network phones
anywhere an access point or wireless hotspot is available.
Your phone uses non-harmonized frequency and
therefore some countries might restrict the use of a
WLAN.
To activate the WLAN feature:
1. In Idle mode, select Applications → Settings →
Wireless and network → Wi-Fi settings → Wi-Fi.
An active WLAN running in the background will
consume battery power. To preserve battery power,
only activate the WLAN when needed.
76
Advertisement
Table of Contents
