Chapter 3. Installation
3.1
Installing HDD
The SVS-5R supports a maximum of 4 SATA hard drives. To ensure proper installation, please
follow the instructions below.
※Caution: All SATA hard drives must be of the same model.
Using the enclosed access panel lock, open the right front panel, and then the left front panel
-
while holding down the two buttons on the left panel.
- For the hot-swap drive bays, ① and ③ are shaped identically to each other, while ② and ④
are shaped identically. Please install them in the designated locations.
①
②
③
④