Dip Switch Tables - Epson TM-T88V User Manual

English

DIP Switch Tables

When using Serial Interface
DIP Switch Bank 1
SW Function
1-1 Data receive error
1-2 Receive buffer
capacity
1-3 Handshaking
1-4 Data word length
1-5 Parity check
1-6 Parity selection
1-7 Transmission speed (See table A.)
1-8
DIP Switch Bank 2
SW Function
2-1 Handshaking
(BUSY condition)
2-2 Do not change
settings
2-3 Print density
2-4
2-5 Release condition of
receive buffer BUSY
(If receive buffer
capacity set to 4KB.)
2-6 Do not change
setting.
2-7 I/F pin 6 reset
2-8 I/F pin 25 reset
Table A
Transmission speed (bps) bits per second
*1
38400
4800
9600
19200
*1: When DIP switches 1-7 and 1-8 are on, the transmission
speed can be selected from one of seven speeds:
2400, 4800, 9600, 19200, 38400, 57600, and 115200 bps
by control commands.
16 TM-T88V User's Manual
ON OFF
Ignored Prints "?"
45 bytes 4KB
XON/XOFF DTR/DSR
7 bits 8 bits
Enabled Disabled
Even Odd
ON OFF
Receive buffer Offline or
full Receive buffer
full
Fixed to OFF
See Table B
Releases BUSY Releases BUSY
when remaining when remaining
receive buffer receive buffer
capacity capacity
reaches reaches
138 bytes. 256 bytes.
Fixed to OFF
Enabled Disabled
Enabled Disabled
SW1-7 SW1-8
ON
OFF
ON
OFF
When using Parallel Interface
DIP Switch Bank 1
SW Function
1-1 Auto line feed
1-2 Receive buffer
capacity
1-3 Select paper sensors
to output paper-end
signals (default value
of a command) from
parallel I/F.
1-4 Error signal output
from parallel I/F
1-5~
1-8
DIP Switch Bank 2
SW Function
2-1 Handshaking
(BUSY condition)
2-2 Do not change
settings
2-3 Print density
2-4
2-5 Release condition of
receive buffer BUSY
(If receive buffer
capacity set to 4KB.)
2-6 Do not change
2-7 setting.
2-8 I/F pin 31 reset
signal (Do not
change setting)
ON
Table B
ON
OFF
Print density/low power
OFF
Print density "Normal"
Print density "Medium"
Print density "Dark"
Do not set
ON OFF
Always Always disabled
enabled
45 bytes 4KB
Disabled Roll paper end
sensor enabled,
Roll paper near-
end sensor
enabled
Disabled Enabled
Undefined
ON OFF
Receive buffer Offline or
full Receive buffer
full
Fixed to OFF
See Table B
Releases BUSY Releases BUSY
when remaining when remaining
receive buffer receive buffer
capacity capacity
reaches reaches
138 bytes. 256 bytes.
Fixed to OFF
Fixed to ON
SW2-3 SW2-4
OFF
ON
OFF
ON
OFF
OFF
ON
ON