Infrared; Network Settings - Sharp WX-T91 User Manual

Infrared

(M 12-2)
In order to use the infrared function, you need to search
for other infrared enabled devices to establish contact
with your phone. Keep your phone within a distance of
20 centimetres from the devices before searching. The
infrared setting will return to off when no data is
transmitted/received via infrared communication.
Turning On or Off
→
"Connectivity" "Infrared"
1.
Select "On" or "Off ".
The infrared setting is activated, and "
displayed.
Sending All Data
→
"Connectivity" "Infrared"
1.
Enter your handset code.
The default handset code is "9999". For details on
changing the handset code, see "To Change the
Handset Code" on page 120.
2.
Select the desired data to send.
3.
Enter the authorisation code.
→
"Switch On/Off "
" is
→
"Send All"

Network Settings

Selecting a Service Automatically
Each time the power is turned on, your phone selects a
service automatically.
→
"Connectivity" "Network Settings"
Service"
1.
Select "Auto".
Selecting a Service Manually
→
"Connectivity" "Network Settings"
Service"
1.
Select "GSM".
Selecting a Network Automatically
Each time the power is turned on, your phone always
tries to connect to the preferred network.
If your phone is not connected to the network, you can
perform the following immediately to establish the
preferred network connection.
→
"Connectivity" "Network Settings"
→
Network" "Automatic"
(M 12-3)
→
"Select
→
"Select
→
"Select
Connectivity 127