Honeywell RTH7400D Owner's Manual page 33

Step 11. Configure Installer Setup (Cont)
16. If you do not have a number 0240 on the left side of
your display, go to the next page.
17. If you have a number 0240 on the left side of your
display, press the Up or Down arrow to select your
setting for Installer Setup Number 0240.
18. After you select your setting, press the Next button
to go to the next Installer Setup Number.
INSTALLER
SETUP NUMBER
GOES BACK
TO LAST
INSTALLER
SETUP
Installer
Setup
Number
0240
Period
Wake Leave
Go Back Next
ADVANCE TO
NEXT INSTALLER
SETUP
Installer
Setup
Name
5 - Gas or Oil Furnace (less than
Heating
Cycle
Rate
9 - Electric Furnace.
3 - Gas or Oil Hot Water, Gas 90%+
1 - Gas or Oil Steam, Gas or Oil
Clock More
Done
(Select Your Setting)
Settings
90% efficient).
High-Efficiency Furnace.
Gravity.
33
SETTING
UP
ARROW
DOWN
ARROW
PRESS TO EXIT
INSTALLER SETUP
M22329
69-1726—1