Advertisement
CA8900 Z-Wave
Thermostat Installation Guide
®
Part One: Operating Guide
Operating the CA8900
To set the thermostat to control your heating system,
press the HEAT button so the word HEAT displays.
Press again to turn OFF. The word HEAT will flash
when the thermostat is calling for heat.
Press the TEMP UP and TEMP DOWN buttons to select
the desired temperature. The word TARGET will be
displayed with the temperature you are setting. (The
display will return to showing room temperature in 5
seconds.)
To set the thermostat to control your cooling system,
press the COOL button so the word COOL displays.
Press again to turn OFF. The word COOL will flash
when the thermostat is calling for cooling.
Using the SAVE ENERGY Button
The NORMAL and SAVE ENERGY buttons allow you to
quickly switch from the NORMAL programmed target
temp to a pre-determined set-back temperature, called
the Save Energy temp.
•
When in HEAT mode:
a.
Press the
SAVE ENERGY button. The words SAVE
and TARGET appear.
TEMP UP or TEMP DOWN buttons to set
b.
Press the
the SAVE ENERGY temperature for heating, or
you can accept the default temperature of 65°F.
After 5 seconds, the display shows the room
temperature and the words SAVE HEAT.
•
When in COOL mode:
SAVE ENERGY button. The words SAVE
a.
Press the
and TARGET appear.
b.
Press the
TEMP UP or TEMP DOWN buttons to set
the SAVE ENERGY temperature for cooling, or
you can accept the default temperature of 80°F.
After 5 seconds, the display shows the room
temperature and the words COOL SAVE.
•
Slide the fan switch to
the system's fan during heating and cooling.
•
Slide the fan switch to
ously, even without heating and cooling.
Press the NORMAL button to return to the pro-
grammed target heat or cool temperature, (depend-
ing on which mode you are in). You can press the
TEMP UP or TEMP DOWN buttons to change this target
temperature. After 5 seconds, the display shows room
temperature.
Providing a brighter solution.™
AUTO to automatically run
ON to run the fan continu-
2
Advertisement
