Advertisement
0
Profi/e/ r nce
Seri
SCB2OOOCBB - Advantium
TM
Wall Oven
Single SpeedcookInstallation
Speedcook OvenInstallation above a
GE Warming Drawer
Construct Solid
Bottom Min.3/8"
Plywood
Supported b y
2x4or1 x2
Runners, all
Four S ides
SpeedcookOvenInstallationabove a single
GEBuilt-In Wall Oven
Construct Solid
Bottom Min.3/8"
Plywood
, Supported by
2x4orlx2
Runners, all
Four S ides
Construct Solid
Bottom Min.3/8"
2x4orlx2
Runners, all
Four S ides
363/4" Mir
Required
Order a 30"wide single oven cabinet or cut the opening
in a wall to dimensions shown.
The rough opening must be:
• Depth - 19"Min.
• Width - 28-1/2"Min.
• Height - 21"Min.
• 36-3/4"from the floor to the cutout is required.
• These ovens require 3/4" overlap on each side, top and
bottom of the cutout.
• Oven overlaps will conceal cut edges on all sides of
the opening.
Specification Revised10/00
or2x2
Runners o r
SolidBottom,
MustSupport
100Ibs.
Note: Additional clearance between the
cutouts may be required. Check to be sure
the oven supports above the Warming
Drawer location does not obstruct the
required interior 23-1/2" depth and 9-1/4"
height. See installation instructions for
details.
Per Oven
Requirement
Foranswersto yourMonogram?
GEProfilePerformance Seriesl "
GEProfile
TM
or GEappliancequestions, c all
GEAnswerCenter _ service,800.626.2000.
(_
Listed by
Underwdters
Laboratories
Advertisement
